Rockey 200 User Manual

[ftsafe]

ROCKEY 200 is a handy and portable USB Smart Card reader that can perform read/write operations on any ISO 7816-1/2/3/4 smart cards which are compatible with protocol T=0 and T=1. It is PC/SC compliant and works well as a data communication bridge between smart card and PC.

Main Features:

Host Interface: USB 2.0 (also compliant with USB 1.1)
Supported protocol: ISO7816 T=0 and T=1
Smart Card Clock Frequency: 4MHz-12MHz
Interface Speed: 9600bps~625kbps
Card Type: Class A, B, C
ISO standard: ISO/IEC7816 1,2,3,4

Usage:
When using the Rockey200 card reader for the first time, you need to install the reader's driver.
The specific installation method is as follows:

1. Download the driver file and unzip it(from Google Drive or the attachment)

2. Find the EXE file corresponding to the computer system bit(such as 32-bit system or 64-bit system) , then Double-click it to install

3. After the installation is successful, insert the Rockey200 into the computer and you can use it.

Note: Do not insert the card reader to the computer until the driver is installed successfully.

[igblanch]

Thanks for your information