Our Online Store have the new products: RFID antenna board. Currently it can work with JC10M24R and JCOP4 card chips.
Compared with normal cards, the antenna board module has a smaller size and fixed holes, which is easy to integrate in the IOT(Internet Of Things) project.

Rockey 200 User Manual

card reader

Moderator: horse dream

Posts: 52
Joined: Fri Aug 14, 2015 4:05 am
Points :126

Rockey 200 User Manual

Post by ftsafe » Mon Apr 09, 2018 5:37 am

ROCKEY 200 is a handy and portable USB Smart Card reader that can perform read/write operations on any ISO 7816-1/2/3/4 smart cards which are compatible with protocol T=0 and T=1. It is PC/SC compliant and works well as a data communication bridge between smart card and PC.

Main Features:
    Host Interface: USB 2.0 (also compliant with USB 1.1)
    Supported protocol: ISO7816 T=0 and T=1
    Smart Card Clock Frequency: 4MHz-12MHz
    Interface Speed: 9600bps~625kbps
    Card Type: Class A, B, C
    ISO standard: ISO/IEC7816 1,2,3,4

When using the Rockey200 card reader for the first time, you need to install the reader's driver.
The specific installation method is as follows:
    1. Download the driver file and unzip it(from Google Drive or the attachment)
    2. Find the EXE file corresponding to the computer system bit(such as 32-bit system or 64-bit system) , then Double-click it to install
    3. After the installation is successful, insert the Rockey200 into the computer and you can use it.
Note: Do not insert the card reader to the computer until the driver is installed successfully.
You do not have the required permissions to view the files attached to this post. Please login first.

Posts: 1
Joined: Sat Jan 05, 2019 10:48 pm
Points :8

Re: Rockey 200 User Manual

Post by igblanch » Sat Jan 05, 2019 10:54 pm

Thanks for your information

Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 4 guests

JavaCard OS : Disclaimer